input |
voltage stabilization range |
three-phase 304v-456v, single-phase 176v-264v |
frequency | 50hz/60hz | |
output | rated voltage | phase voltage 220v, line voltage 380v |
center voltage | ±7% | |
accuracy of voltage stabilization |
±5% | |
response time | ≤50ms | |
waveform distortion | no additional waveform distortion (static) | |
efficiency | ≥98% | |
three-phase unbalanced degree |
three-phase voltage balance automatically | |
time delay output | voltage stabilization output first (protect equipment from impact) | |
over-voltage |
when output phase voltage is beyond 10% (245), it cuts off the output, or turns to bypass uninterruptedly |
|
under-voltage |
when output phase voltage is lower than 10% (198), it cuts off the output, or turns to bypass uninterruptedly |
|
protection | open-phase | with automatic cut off function |
overload | electronic detector, cut off the output in 3min in case of overload | |
over-current | dual protections of electronic detector and circuit breaker | |
short-circuit | dual protections of electronic detector and circuit breaker | |
bypass | by manual, or automatic bypass uninterruptedly | |
indicator | voltage | a, b, c and σabc three phases have trms digital display respectively |
current | a, b, c and σabc three phases have trms digital display respectively | |
working status | voltage stabilization status and utility power status | |
abnormal | over-voltage, under-voltage, overload, fuse blowout | |
working mode | two modes: voltage stabilization and utility power | |
overload capacity | 5 times the rated current for 1s |